Laboratory 200 Degree High Temperature Curing Testing Anaerobic Nitrogen Furnace

Structural characteristics

1. Inner box material: 1.5mm thick high-quality SUS304 stainless steel mirror without deformation

2. Outer box material: 1.2mm thick cold-rolled steel plate with electrostatic baking paint, sturdy, beautiful, and durable

3. Inner box process: Made of stainless steel integral welding to ensure sufficient circulation protection of the test sample under the injection of inert gas

4. Insulation cotton: The insulation layer thickness of the whole machine is 100mm, filled with ultra-fine ultra ceramic fiber insulation cotton/silicate aluminum plate

5. Heater: Ceramic tile heater, embedded heating element installed in the stainless steel cavity interlayer is extremely safe

6. Fan: Circulating dual group dedicated long shaft high-temperature turbine structure fan, specialized in shaft design with better resistance to temperature changes in high-temperature environments

7. Cooling and exhaust system: There is an exhaust pipe installed at the top, and a turbine high-temperature fan is used to forcibly exhaust the hot air inside the box after the end of operation.

8. Gas protection: The operation panel is designed with an inert gas control flow meter, which controls the intake by adjusting the flow rate

9. Nitrogen interface: After installation at the bottom of the box, a 10mm caliber automatic air inlet is connected to the control nitrogen flow pipeline.

10. Sample tray: Made of stainless steel bent plate, perforated on the surface of the partition, with a material thickness of 1.0mm. The whole machine is equipped with 2 stainless steel partitions, and each layer of partition is designed to carry a load of 15kg

11. The height of the tray can be adjusted up and down, with adjustable high and low feet